How to Reshaft a Golf Club: The Ultimate Guide in 2023

Golf club re-shafting guide

Re-shafting a golf club, also known as replacing the club’s shaft with a new one, is a common technique used by golfers to improve performance, adjust the length or flex of the club, or replace a damaged shaft.
In this article, we have discussed the process of “how to reshaft a golf club” and the reasons why a golfer might choose to re-shaft a club.
The process of re-shafting a golf club requires specific tools and materials, such as a re-shafting tool, grip tape, and grip solvent.

Golf club re-shafting involves:

  • Taking off the old shaft.
  • Selecting the right length and stiffness for the new shaft.
  • Putting in the new shaft and gripping it properly.
To stay safe and ensure the re-shafting process goes smoothly, you must follow the correct technique.
For golfers looking to improve their performance, re-shafting their clubs can be done either by a professional or by following a guide. However, it is always best practice to have them professionally fitted and adjusted afterward to ensure the best results.

Materials and tools needed for re-shafting a golf club

Re-shafting tool
This specialized tool removes the old shaft from the clubhead. It can be purchased from golf equipment retailers or online.

New shaft

This is the replacement shaft that will be installed in the club head. The new shaft should be selected based on the golfer’s desired length and flex. Purchasing the shaft from a reputable golf equipment retailer or club maker is recommended.

Grip tape

This is used to secure the grip on the new shaft. It is available in various widths and can be purchased from golf equipment retailers or online.

Grip solvent

This is used to soften the grip tape and make it easier to apply to the new shaft. It can be purchased from golf equipment retailers or online.

Epoxy

This is a type of adhesive that is used to secure the new shaft in the club head.

Grip

The grip is the rubber or synthetic material that is wrapped around the shaft and provides a comfortable surface for the golfer to hold. It can be purchased from golf equipment retailers or online.

Grip installation tool

This is used to install the grip onto the new shaft. It can be purchased from golf equipment retailers or online.

Cutting tool

This can be a saw or a utility knife, which is used to cut the shaft to the desired length.

Measuring tool

This can be a ruler or a tape measure, and it is used to measure the proper length of the new shaft before it is installed in the clubhead.
It is essential to use quality materials and tools to ensure that the re-shafting process is done properly and that the club performs as expected.

Step-by-step instructions on how to reshaft a golf club

Removing the old shaft
Removing the old shaft: Use the re-shafting tool to remove the old shaft from the clubhead. Carefully loosen and remove the old shaft, making sure not to damage the club head.
Measuring the new shaft
Measure the proper length and flex of the new shaft. The length should be based on the golfer’s height and arm length, and the flex should be based on the golfer’s swing speed and tempo. It is best to consult with a professional or refer to a guide to determine the proper length and flex.
Installing the new shaft
Insert the new shaft into the clubhead. Make sure that the shaft is properly aligned and straight.
Securing the new shaft
Use epoxy to secure the new shaft in the club head. Follow the manufacturer’s instructions for mixing and applying the epoxy. Allow the epoxy to dry completely before proceeding to the next step.
Cutting the shaft
Cut the new shaft to the proper length. Measure the length of the new shaft against the old shaft and mark the point where it needs to be cut. Be very careful while cutting, as a wrong cut may damage the shaft, leading to poor performance.
Installing the grip
Apply grip solvent to the new shaft. Then, apply grip tape to the shaft, ensuring it is centered and straight. Use the grip installation tool to press the grip onto the new shaft, following the manufacturer’s instructions.
Step-by-step instructions on how to reshaft a golf club
Finish the process
Once the grip is installed, the club is ready for use. It’s recommended to have the club professionally fitted and adjusted after re-shafting to ensure optimal results.
For best results, it is critical to adhere closely to these instructions and use the correct methods while re-shafting your club to ensure optimal performance. If you don’t feel comfortable, it’s safest to take it to a professional.

Safety precautions while replacing golf club shaft

Wear gloves
When working with epoxy, grip solvent, and grip tape, it is essential to wear gloves to protect your skin from the chemicals used in these products.
Use proper technique
Use proper technique when removing the old shaft and installing the new shaft to avoid injury and damage to the club.
Handle the club with care
When handling the club, be sure to grip it securely and avoid dropping it, as this can cause damage to the clubhead or shaft.
Keep the work area clean
Make sure that the work area is clean and well-organized to avoid tripping hazards and to ensure that all of the tools and materials needed are within easy reach.
Take breaks
If you are working on re-shafting multiple clubs, take regular breaks to avoid fatigue.
Keep children and pets away
Keep children and pets away from the work area to avoid accidents.
Follow the instructions
Follow the instructions for the re-shafting tool, epoxy, and grip solvent carefully to avoid accidents and to ensure that the club is re-shafted correctly.
Be aware of the tools
Be aware of the tools and equipment you are using, and ensure they are in good condition before starting the re-shafting process.
re-shafting a golf club
For your safety and the effectiveness of the re-shafting process, it is important to take precautions when replacing a golf club shaft. If you need more clarification about the next step, it’s advisable to seek advice from an expert.

Conclusion

The shaft of a golf club plays a crucial role in determining your overall performance on the course. While many golfers focus on the club head, it is just as important to pay attention to the shaft, as it can affect the flex and weight of the club.
When re-shafting, it is important to research and tests different options to find the right fit for your swing. This can help improve your trajectory and increase your distance.
Whether you re-shaft your club at home or visit a professional repair shop, it is important to follow proper instructions, take time, and use safety precautions. Choosing an ideal shaft can enhance your golf game and help you play at your best.

Frequently Asked Questions

How often should I re-shaft my golf clubs?
It depends on how often you play and the condition of your clubs. Generally, it’s recommended to have your clubs re-shafted every 3-5 years or when you notice a significant decline in performance.

Can I re-shaft my golf clubs?

Yes, you can re-shaft your own golf clubs if you have the proper tools and knowledge; however, having your clubs professionally re-shafted is recommended to ensure optimal performance and avoid damaging the club.

What is the difference between re-shafting and regripping?